Carbon fiber allows us to build very light wheels. It allows us to build very light wheels that are also aerodynamically enhanced. The issue is that sometimes the aerodynamic enhancements don’t quite like the wind. Some of us even live in very windy places. That is why we started to build the DT Swiss FL40 carbon fiber aero wheelset.
With a 40 mm deep rim, we can give you a small aero advantage but not enough for a crosswind to try and drive you into traffic. Our FL40 rim is great for those days when it is a bit blustery, but you have to get outside and train or race.
Our FL40 rim is constructed using Toray T700 carbon fiber. We use Toray T700 on all of our Fast and Light rims. Our engineers are specialists at getting the exact properties we want out of T700 using their layup expertise. We want you to have a light, stiff, and fast aero wheel rim, more importantly, we also wanted it to be affordable. We have delivered on that premise.
To match the quality of our rims, it is only natural that we offer you them with DT Swiss hubs. You can pick from either the 350S or the 240S hubsets. The 240S will focus on the light part of our design brief, and the 350S will focus on the affordable part.
Whichever hubset you pick we will have laced them to our carbon fiber rim using Sapim CX-Ray spokes. As you can see no corners have been cut in bringing you an exceptional wheelset, and that is why we offer it to you with a two-year guarantee.
Wide Rim Tech
25mm rim wide creates a better, more stable support, while the shape of the tire and rim together creates regular, stable air flow, in short, more aerodynamics, less attrition. provides an ideal basis for 25/28mm tires, the sizes currently popular.
2-Way Clincher Tubeless. Tubes or No-Tubes
Use either traditional tires with tubes, or tubeless tires without tubes. Tubeless tires can provide lower rolling resistance and better protection from punctures.
High Quality Straight Pull Hub
Novatec straight pull hub with 4 pawls and high quality Japanese sealed EZO bearings, it can use 3-5 years under normal usage. Thousands of riders all over the world on these hubs and they are great performers and super durable.
Sapim CX-RAY As light as a titanium spoke
The CX-Ray still receives the best results in fatigue testing of any spoke. The CX-Ray aero spoke combines excellent aerodynamics with low weight and great strength. Not only are they more aerodynamic, they also make wheels lighter and stronger. Its unique strength and flexibility make the CX-Ray suitable for most bicycle disciplines. CX-Ray spokes are used by top bike racers and triathletes around the world.
This wheelset has been certified and approved by the UCI (Union Cycliste Internationale), for use in UCI sanctioned road races.
|Type||Carbon Racing Bike Wheelset|
|Material||100% Carbon Fiber Toray T700|
Finish: UD Matt
|Profile||Clincher Tubeless Ready|
|Hub||DT Swiss Hub 240S/350S|
|Spoke||Sapim CX-Ray Spokes|
|Spoke Count||Front: 20 Rear: 24|
Front Wheelset: 15N
Rear Wheelset: 13-20N
|Spoke Pattern|| Front: Radial
Rear: 2-cross drive side
Radial non drive side
|Nipple||Alloy Color: Black|
|Cassette Compatibility||Shimano 10/11speeds|
Total: 1426.25g (DT240S) / 1473.90g(DT350S)
Front: 643.60g (DT240S) / 641.90g(DT350S)
Rear: 782.65g (DT240S) / 832.00g (DT350S)
|Brake Surface||3K Braking Track|
|Rider Weight Limit||220lbs / 100kg|
1 set of skewer
Carbon brakes pads
|Packing Size||81.5cm x 17cm x 65.5cm|
Recommended Tire Pressure
Below Chart is our recommended tire pressure,you can see more click here.
|STANDARD CLINCHER TIRE WITH INNER TUBE||TUBELESS TIRES|
|≤ 65 KG RIDER||23mm - 95/100 psi
25mm - 90/95 psi
28mm - 85/90 psi
|23mm - 90/95 psi
25mm - 85/90 psi
28mm - 80/85 psi
|65 - 75 KG RIDER||23mm - 100/105 psi
25mm - 95/100 psi
28mm - 90/95 psi
|23mm - 90/95 psi
25mm - 85/90 psi
28mm - 85/90 psi
|75 - 85 KG RIDER||23mm - 101/106 psi
25mm - 96/101 psi
28mm - 91/96 psi
|23mm - 95/98 psi
25mm - 90/95 psi
28mm - 85/90 psi
|85 - 95 KG RIDER||23mm - 104/109 psi
25mm - 99/104 psi
28mm - 94/100 psi
|23mm - 95/99 psi
25mm - 90/95 psi
28mm - 88/95 psi
ICAN accepts the following payment methods. VISA, Mastercard via Paypal online. also if you want WESTERN UNION service or Bank Transfer，then just contact us.
All ICAN products price we quote to the customer does not include taxes except the oversea warehouse products. if need to pay the taxes, ICAN does not responsible for any custom duty or import tax.it will be buyer duty.
We can mark the invoice with a Low Declared Value for you, so pls contact us if you have a request for the declared value.
If you buy our oversea warehouse products, and the price including taxes, customers do not need to pay, taxes prepaid by ICAN.
Fast Express Shipping Worldwide
We ship to all countries, by China EMS. See the shipping table to the below for a list of countries. Once we get your order we will ship out the frame immediately begin custom hand-building your wheels with the options you’ve selected. We ship out your wheels by China EMS and always provide a tracking number.
About the ICAN small item, we will ship out by E-packet or DHL Global Mail.this will take 12-20 days.
If you want super fast shipping time, then ICAN offer DHL shipping service, it will just take 3-5 working days, pls contact us to get the shipping price.
|Country||Frame & Wheelset Shipping Rate||Expected Delivery|
|USA||$80.00 USD||5~ 14 Days|
|Canada||$80.00 USD||5 ~ 14 Days|
|Japan||$60.00 USD||4 ~ 7 Days|
|Australia||$80.00 USD||5 ~ 12 Days|
|UK||$80.00 USD||7~ 14 Days|
|Europe||$80.00 USD||7 ~ 14 Days|
|Others||$80.00 USD-120.00 USD||15 ~ 25 Days|
2 Year Free Warranty
ICAN warranty wheels against manufacturing defects, for a period not to exceed two years, from the date of purchase. During that period, ICAN will replace or repair(when possible) the defective part.
Wheelset will have a unique identification number and warranty card. Complete the provided card and warranty form, and send them to us.
Failure to use the provided warranty card will void your warranty.Save your dated receipt for proof of purchase.
Your wheels are covered against manufacturing defects found within two years. In such cases, if the warranty item cannot be repaired at our expense, we'll replace the warranty item and pay shipping both ways. This warranty only applies to the original owner and is not transferable. To start a warranty claim please contact us at email@example.com
|Manufacturing Defects Within 2 year||We will replace the faulty component and pay shipping cost both ways.|
|After 2 Year||Maintenance, upgrade, and repair service at minimal cost.|
|What's Not Covered||Normal Wear and Tear|
- Misuse (Jumping, trick riding, etc.)
- Modification of wheels
- Tire pressure exceeding 140psi
- Improper assembly
- Installation of parts or accessories not originally intended for, or not compatible with the wheelsets sold.
- Use of brake pads not designed for carbon wheels
- Normal wear and tear (bearings, spokes, nipples, brake tracks, tires, inner tubes, pawls, freewheel bodies, seals, rim tape etc.)
- Products which have been incorrectly installed and/or adjusted.
- Issues brought about by neglect or poor maintenance.
- Surface finish and cosmetic treatments (anodizing, decals, etc.)
- Crash damage.
- All other bicycle components
- Consequential or incidental damages (where applicable)
ReturnsIn the event of a manufacturing defect, ICAN will cover the return shipping costs. However, if the defect is deemed to not be due to the manufacturing process, then the customer will be responsible for the return shipping costs.
1.ICAN make a careful test and check before every single item is shipping. In case of bad luck that you receive, ICAN items in broken or defective quality would like a return and refund or replacement. Please contact us within 3 working days and show us as much as possible proof, photos, videos etc.
2. Refund will be granted after we receive the returned items in original condition.
3. New items or Repaired items will be shipped to you as soon as we receive the items for replacement.
Name: Chen Shaofeng, 陈少丰
Address: 5th Floor, B6 Building, Yinlong Industrial Zone, Longdong Community, Longgang District 龙岗区龙岗街道银龙工业园B6栋5楼东
City: Shenzhen，Guangdong, 广东深圳市
Post code: 518116
Country: China, 中国
Phone number: +86 135 1009 8908
Ps: Customers will only be charged once at most for shipping costs (this includes returns); No-restocking to be charged to the consumers for the return of the product.
1. Which brake pads should we use with those wheels? Regular or Carbon dedicated?
The wheels come with brake pads. Or you can buy the carbon specific pads, such as Swiss Stop yellow pads.
2. How can I buy this wheel with campagnolo freehub?
Just leave a message to us when you make the order. And we will build it for you.
3. Can we order these with no decals?
Yes, we also provide the wheels without logo. Please contact us firstname.lastname@example.org if you do not need the logo.
4. Can I use regular clincher tires on these wheels?
Yes, you can use regular clincher tire and tube on them.
5. What tire size do you recommend on this wheels?
You can use 700x23-28c tire. Thanks.
6. What length valve should one use with FL40?
60mm will be ideal.
7. Do these have basalt breaking surface?
These are 3k brake surface. The performance is the same as basalt breaking surface.
8. Do I have to pay import duty or taxes for the items?
If you buy our items located in Oversea warehouse, then the taxed prepaid by us, and the price including the taxes and shipping cost.if you buy the items from Chinese warehouse, then buyer need to pay taxes.but we can declare low value to avoid the taxes.pls contact us email@example.com to know more.
9. What are the length of the spokes on FL40 with novatec hub and sapim cx-ray spoke?
The front is 270mm, and the rear is 278mm and 282mm. Thanks.
10. What is the diameter of the spoke/nipple holes?
It is 7.5mm.
11. Can you tell me the correct tension value of FL40 for front and rear, drive and non-drive?
The spoke tension of the FL40-Novatec-sapim wheels, the front is 13, the rear drive side is 15, and the non-drive side is 5-6. We use the parktools to measure them.
12. Is there a version that has a center lock hub for disk brakes?
We provide 2 kind hubs, 6 bolt rotor brake hub and the center lock disc hub. So if you need a center lock hub for disk brakes, that would be okay, we can build that for you.
13.Does the disc hub is centerlock or 6 bolts?
We both have that; you just need to note that you want the centerlock or 6 bolts when placing the order.
14.How long will it ship?
From Chinese warehouse: 1-3 business days to process the order,we usually use China EMS; it may take 7-12 working days.
From oversea warehouse:one day for process the order, and the shipping time will be 1-5 business days.
15.Will wheelset with DT hubs be better?
DT Swiss is a famous brand in the hub industry. It is an upgrade option, compared to others hubs.
16.Do I need anything extra to go tubeless?
If you want to go tubeless, you need a tubeless kit - valves, tubeless rim tape and sealant. You can order these online, or source them from a good local bike shop.
17. Why this wheelset is so expensive?
DT hubs have the better performance, lighter weight. It is an upgrade option, and you can buy our popular AERO series wheelset, that is best cost performance.
18.Can I get the spare spokes?
Sorry that we don’t send these for free, you can buy in our online store.
19. Do you have rim tapes?
Hi, yes, the rim tapes will be packaged in the box.
20. If the color is black, is the hub and QR color black too?
When ordering black for the color, the color of the hub and quick release is also black.
21. Hubs and nipples, can they be made in red?
Hi, yes, but please tell us that before you place the order or note that when buying.
22. I’d like to order the hubs in red, please tell me how to order.
You can contact with us before ordering or just note that you want the red hubs when placing the order.